2011 Mercury Milan Tire Pressure

2011 Mercury Milan tire inflation pressures with the recommended tire pressure, trims, original equipment tire size sets, winter tire pressure, tire load index, tire speed rating and other information.

2011 Mercury Milan Base Model

2011 Mercury Milan Base Model is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P205/60R16
Recommended Tire Pressure 34 psi 34 psi
Acceptable Winter Tire Pressure 37 - 39 psi 37 - 39 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 91 (1356 lbs or 615 kg)
Tire Speed Rating (Maximum Speed) T (118 mph or 190 km/h)
Front Tire Rear Tire
Tire Size P225/50R17
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 93 (1433 lbs or 650 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h)

2011 Mercury Milan Hybrid

2011 Mercury Milan Hybrid is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P225/50R17
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 93 (1433 lbs or 650 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h)

2011 Mercury Milan Premier

2011 Mercury Milan Premier is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P225/45R18
Recommended Tire Pressure 35 psi 35 psi
Acceptable Winter Tire Pressure 38 - 40 psi 38 - 40 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 91 (1356 lbs or 615 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h)
Front Tire Rear Tire
Tire Size P225/50R17
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 93 (1433 lbs or 650 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h)

Note: All tire pressure data listed is for informational purposes only. TirePressure.org does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.

It is indispensable to keep the right tire inflation pressures for 2011 Mercury Milan tires. Low tire pressure, and underinflated tires can prompt to lopsided and inordinate tire wear, poor handling, and diminished fuel economy. High tire pressure and overinflated tires can bring in reduced traction, poor slowing down and can even be a reason for a tire blowout. Check tire pressure routinely and keep up the right tire inflation for 2011 Mercury Milan to enjoy a safe and comfortable drive, get a good deal on gas and keep auto insurance expenses low.

Suggested tire pressure for 2011 Mercury Milan is controlled by the auto maker dependent on its qualities and unique equipment tire sizes. You can find out about 2011 Mercury Milan suggested tire pressure in owner's manual or on a tire bulletin on the side of driver's door or door jamb. 2011 Mercury Milan tire inflation will be recorded in psi (pounds per square inch), bar or kPa (kilopascals). Remember that tire inflation shown on tire sidewall is the greatest air pressure the tire can hold to convey its most extreme burden, and not really the recommended tire pressure for 2011 Mercury Milan. 2011 Mercury Milan may have diverse suggested tire pressure settings for front and back tires, particularly if equipped with staggered tires.

To check 2011 Mercury Milan tire pressure you should know its suggested tire inflation, and a tire pressures measure. Check tire inflation when tires are cold and have not been driven for at least 3 hours. Change 2011 Mercury Milan tire inflation to the suggested tire pressure levels as needed by adding air with a tire inflator.

In the event that you replace 2011 Mercury Milan original equipment tires with optional or plus tire sizes, be certain to follow steps on how to apply tire load inflation tables when replacing 2011 Mercury Milan tires to discover legitimate tire pressure for new tires. Continuously allude to the 2011 Mercury Milan owner’s manual for any particular safety advice regarding the application of replacement tires.

2011 Mercury Milan tire pressure varies with weather temperatures, so when temperatures drop tires may lose around 1 psi of air pressure for every 10 degree Fahrenheit diminishing in temperature. During winter season, 2011 Mercury Milan tires can be inflated 3 to 5 psi over the suggested tire pressure settings to make up for lower temperatures. Never over-inflate above psi showed on tire sidewall. Try to check tire pressure routinely in colder times to keep tires appropriately inflated for a safe ride on snow and frosty streets. Consult owner's manual for recommended winter tire pressure for 2011 Mercury Milan.

2011 Mercury Milan ought to be equipped with tire pressure monitoring system (TPMS) that utilizes tire pressure sensors to caution the driver when tire pressure is low. At the point, when 2011 Mercury Milan low tire pressure warning light is on, be sure to check all tires for low air pressure and inflate as needed. Refer to owner's manual on the most proficient method to reset 2011 Mercury Milan tire pressure monitoring system.

Check out our FREE tools and discover everything you need to know about tires

Bar

Psi

Bar

kPa

Psi

kPa

Tire Pressure Temperature Calculator

Gas Savings Calculator

Tire Speed Rating Chart

Tire Load Index Chart

Tire Load Range Chart

General Metric Tire Load Inflation Chart

Metric Tire Load Inflation Chart

P-Metric Tire Load Inflation Chart

LT-Metric Tire Load Inflation Chart

Flotation Tire Load Inflation Chart

Special Trailer Tire Load Inflation Chart

Temp. Spare Tire Load Inflation Chart