2010 Toyota Sequoia Tire Pressure

2010 Toyota Sequoia tire inflation pressures with the recommended tire pressure, trims, original equipment tire size sets, winter tire pressure, tire load index, tire speed rating and other information.

2010 Toyota Sequoia Limited

2010 Toyota Sequoia Limited is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P275/55R20
Recommended Tire Pressure 30 psi 33 psi
Acceptable Winter Tire Pressure 33 - 35 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 111 (2403 lbs or 1090 kg)
Tire Speed Rating (Maximum Speed) H (130 mph or 210 km/h)

2010 Toyota Sequoia Platinum

2010 Toyota Sequoia Platinum is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P275/55R20
Recommended Tire Pressure 30 psi 33 psi
Acceptable Winter Tire Pressure 33 - 35 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 111 (2403 lbs or 1090 kg)
Tire Speed Rating (Maximum Speed) H (130 mph or 210 km/h)

2010 Toyota Sequoia SR5

2010 Toyota Sequoia SR5 is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P275/65R18
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 114 (2602 lbs or 1180 kg)
Tire Speed Rating (Maximum Speed) T (118 mph or 190 km/h)

Note: All tire pressure data listed is for informational purposes only. TirePressure.org does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.

It is indispensable to keep the right tire inflation pressures for 2010 Toyota Sequoia tires. Low tire pressure, and underinflated tires can prompt to lopsided and inordinate tire wear, poor handling, and diminished fuel economy. High tire pressure and overinflated tires can bring in reduced traction, poor slowing down and can even be a reason for a tire blowout. Check tire pressure routinely and keep up the right tire inflation for 2010 Toyota Sequoia to enjoy a safe and comfortable drive, get a good deal on gas and keep auto insurance expenses low.

Suggested tire pressure for 2010 Toyota Sequoia is controlled by the auto maker dependent on its qualities and unique equipment tire sizes. You can find out about 2010 Toyota Sequoia suggested tire pressure in owner's manual or on a tire bulletin on the side of driver's door or door jamb. 2010 Toyota Sequoia tire inflation will be recorded in psi (pounds per square inch), bar or kPa (kilopascals). Remember that tire inflation shown on tire sidewall is the greatest air pressure the tire can hold to convey its most extreme burden, and not really the recommended tire pressure for 2010 Toyota Sequoia. 2010 Toyota Sequoia may have diverse suggested tire pressure settings for front and back tires, particularly if equipped with staggered tires.

To check 2010 Toyota Sequoia tire pressure you should know its suggested tire inflation, and a tire pressures measure. Check tire inflation when tires are cold and have not been driven for at least 3 hours. Change 2010 Toyota Sequoia tire inflation to the suggested tire pressure levels as needed by adding air with a tire inflator.

In the event that you replace 2010 Toyota Sequoia original equipment tires with optional or plus tire sizes, be certain to follow steps on how to apply tire load inflation tables when replacing 2010 Toyota Sequoia tires to discover legitimate tire pressure for new tires. Continuously allude to the 2010 Toyota Sequoia owner’s manual for any particular safety advice regarding the application of replacement tires.

2010 Toyota Sequoia tire pressure varies with weather temperatures, so when temperatures drop tires may lose around 1 psi of air pressure for every 10 degree Fahrenheit diminishing in temperature. During winter season, 2010 Toyota Sequoia tires can be inflated 3 to 5 psi over the suggested tire pressure settings to make up for lower temperatures. Never over-inflate above psi showed on tire sidewall. Try to check tire pressure routinely in colder times to keep tires appropriately inflated for a safe ride on snow and frosty streets. Consult owner's manual for recommended winter tire pressure for 2010 Toyota Sequoia.

2010 Toyota Sequoia ought to be equipped with tire pressure monitoring system (TPMS) that utilizes tire pressure sensors to caution the driver when tire pressure is low. At the point, when 2010 Toyota Sequoia low tire pressure warning light is on, be sure to check all tires for low air pressure and inflate as needed. Refer to owner's manual on the most proficient method to reset 2010 Toyota Sequoia tire pressure monitoring system.

Check out our FREE tools and discover everything you need to know about tires

Bar

Psi

Bar

kPa

Psi

kPa

Tire Pressure Temperature Calculator

Gas Savings Calculator

Tire Speed Rating Chart

Tire Load Index Chart

Tire Load Range Chart

General Metric Tire Load Inflation Chart

Metric Tire Load Inflation Chart

P-Metric Tire Load Inflation Chart

LT-Metric Tire Load Inflation Chart

Flotation Tire Load Inflation Chart

Special Trailer Tire Load Inflation Chart

Temp. Spare Tire Load Inflation Chart